[cisco-bba] PPPoE and many virtual-templates (per subif/vlan)
Andy Schutz (aschutz)
aschutz at cisco.com
Tue Mar 8 12:07:38 EST 2005
Yes, it should.
> -----Original Message-----
> From: Tassos Chatzithomaoglou [mailto:achatz at forthnet.gr]
> Sent: Tuesday, March 08, 2005 10:57 AM
> To: aschutz at cisco.com
> Cc: 'cisco-bba'
> Subject: Re: [cisco-bba] PPPoE and many virtual-templates
> (per subif/vlan)
>
> Thanks Andy ;-)
>
> This seems to be exactly what i was looking for.
>
> Do you know if this bba-group setup will work for ethernet
> subinterfaces too?
>
> Andy Schutz (aschutz) wrote on 8/3/2005 18:15:
> > Try using bba-groups:
> >
> http://www.cisco.com/en/US/partner/products/hw/routers/ps133/p
> roducts_config
> > uration_guide_chapter09186a0080175167.html#wp1050602
> >
> > Cheers,
> >
> > Andy
> >
> >
> >>-----Original Message-----
> >>From: cisco-bba-bounces at puck.nether.net
> >>[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of
> >>Tassos Chatzithomaoglou
> >>Sent: Tuesday, March 08, 2005 7:22 AM
> >>To: cisco-bba
> >>Subject: [cisco-bba] PPPoE and many virtual-templates (per
> subif/vlan)
> >>
> >>I'm using the following config in order to accept and
> >>terminate PPPoE connections on a 7200 router.
> >>The 7200 is connected through ATM/ima with a 6015 dslam.
> >>
> >>I'm trying to associate PPPoE users to different
> >>virtual-templates, based on the atm subif (or maybe
> >>vlan in the future) on which they are terminated.
> >>
> >>!--------------------------------------------------
> >>vpdn-group PPPoE-USERS
> >> accept-dialin
> >> protocol pppoe
> >> virtual-template 1
> >>!
> >>!
> >>vc-class atm PPPoE-128
> >> protocol pppoe
> >> vbr-nrt 128 32
> >> encapsulation aal5snap
> >>!
> >>vc-class atm PPPoE-384
> >> protocol pppoe
> >> ubr 384
> >> encapsulation aal5snap
> >>!
> >>!
> >>interface ATM2/ima1.1 multipoint
> >> description ** subif 1**
> >> range PPPoE-1 pvc 8/35 8/36
> >> class-range PPPoE-384
> >> !
> >>!
> >>interface ATM2/ima1.2 multipoint
> >> description ** subif 2**
> >> range PPPoE-2 pvc 9/35 9/36
> >> class-range PPPoE-128
> >>!--------------------------------------------------
> >>
> >>When using PPPoE, is there a way i can define another
> >>virtual-template to be used under the 2nd atm
> >>subif?
> >>Maybe i have to change the encapsulation from aal5snap to
> >>something else, but then will it work with
> >>PPPoE?
> >>
> >>When using pppovlan (PPPoE over vlan) as encapsulation is
> >>there a way i can configure different vt
> >>per vlan?
> >>
> >>PS: If i use PPPoA (and aal5mux), i can configure one
> >>-different- vt under each vc-class, so this
> >>scenario is working fine.
> >>
> >>
> >>_______________________________________________
> >>cisco-bba mailing list
> >>cisco-bba at puck.nether.net
> >>https://puck.nether.net/mailman/listinfo/cisco-bba
> >>
> >
> >
>
More information about the cisco-bba
mailing list