[cisco-bba] Removing support for L2F in 12.4T

[Oliver Boehmer (oboehmer)]

L2TP for SGBP has been introduced in 12.2(4)T, and L2TP is preferred if
two RAS support both protocols.
But if you want to run SGBP between a pre-12.2T RAS and a new 12.4T
(with L2F removed), this wouldn't work anymore and is the only real
issue to be considered..  

	oli

Tassos Chatzithomaoglou <> wrote on Thursday, March 17, 2005 11:06 AM:

> Is L2F still being used for SGBP/MMP?
> If not, i don't believe there should be any problem.
> 
> Dennis Peng wrote on 17/3/2005 9:33:
> 
>> Hi,
>> 
>> Cisco is planning to remove support for L2F in 12.4T. Is anyone still
>> using L2F out there? Perhaps to interoperate with other vendor's
>> equipment? If there are concerns about this, please let me
>> know. Thanks.
>> 
>> Dennis
>> _______________________________________________
>> cisco-bba mailing list
>> cisco-bba at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-bba
>> 
> 
> --
> ***************************************
>          Tassos Chatzithomaoglou
> Network Design & Development Department
>               FORTHnet S.A.
>           <achatz at forthnet.gr>
> ***************************************
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba