[cisco-bba] Dot1q cos marking of pppoe packets
Christoph Loibl
cl at sil.at
Fri Dec 1 03:19:41 EST 2006
Hi Tassos!
Tassos Chatzithomaoglou wrote:
> Have you tried applying the policy to the vtemplate which is defined in
> the bba-group?
Yes. This results in
c7301(config-if)#service-policy output OUTPUT
Process 'set' action associated with class-map class-default failed:
Set cos supported only with IEEE 802.1Q/ISL interfaces
This makes sense to me. I even tried to set a qos-group within the
service-policy in in the virtual template, and then match at the dot1q
interface service-policy. This gives the same result... Packets were
correctly matched (counter increases), but cos does not get set (second
counter does not increase).
Regards
Christoph
--
SILVER SERVER \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \\\\\\ \\ \
Ing Christoph Loibl <cl at sil.at> Senior Network Engineer
CL8-RIPE PGP-Key-ID: 0x4B2C0055 http://www.sil.at, http://pix.tix.at
More information about the cisco-bba
mailing list