[cisco-bba] Dot1q cos marking of pppoe packets

[Tassos Chatzithomaoglou]

I guess you need newer IOS.

7200 & 12.3(18) doesn't work.
7200 & 12.2(28)SB5 works fine ;)

--
Tassos


Christoph Loibl wrote on 1/12/2006 10:19 πμ:
> Hi Tassos!
> 
> Tassos Chatzithomaoglou wrote:
>> Have you tried applying the policy to the vtemplate which is defined 
>> in the bba-group?
> 
> Yes. This results in
> 
> c7301(config-if)#service-policy output OUTPUT
> Process 'set' action associated with class-map class-default failed:
> Set cos supported only with IEEE 802.1Q/ISL interfaces
> 
> This makes sense to me. I even tried to set a qos-group within the 
> service-policy in in the virtual template, and then match at the dot1q 
> interface service-policy. This gives the same result... Packets were 
> correctly matched (counter increases), but cos does not get set (second 
> counter does not increase).
> 
> Regards
> 
> Christoph
>