[cisco-bba] A separate Virtual-Template for a PPPoE user
junaid.x86 at gmail.com
Sat Dec 29 18:10:23 EST 2007
I am using Cisco 7200 running IOS: c7200-jk9s-mz.123-21. I am
authenticating and assigning IP addresses to PPPoE users via RADIUS
using "aaa" configurations and a virtual template that handles the
pppoe protocol. However, one customer (say customer A) is being
treated specially and he is being authenticated locally and gets his
ip address via a locally configured pool. Now the problem is that we
want to give IP addresses to other PPPoE customers via locally
configured pools. How can I ensure that the customer A gets the same
IP address every time after being authenticated locally (this is a
restriction that the customer A has to be authenticated lcoally).
Since the customer, in my case, is on a dedicated ATM subinterface,
can I direct this customer to use a dedicated virtual-template where I
mention his dedicated local pool?
Is it possible that the user gets authenticated locally but gets his
IP address from RADIUS?
Any other solution?
More information about the cisco-bba