[cisco-bba] A separate Virtual-Template for a PPPoE user

[Tassos Chatzithomaoglou]

You can use "aaa authen ppp local group radius" so the local database is searched first.

You can also use different bba-groups (each one uses its own vtemplate) and configure the new one as 
a pppoe group under the customer's interface.

--
Tassos


Junaid wrote on 30/12/2007 1:10 πμ:
> Hi,
> 
> I am using Cisco 7200 running IOS: c7200-jk9s-mz.123-21. I am
> authenticating and assigning IP addresses to PPPoE users via RADIUS
> using "aaa" configurations and a virtual template that handles the
> pppoe protocol. However, one customer (say customer A) is being
> treated specially and he is being authenticated locally and gets his
> ip address via a locally configured pool. Now the problem is that we
> want to give IP addresses to other PPPoE customers via locally
> configured pools. How can I ensure that the customer A gets the same
> IP address every time after being authenticated locally (this is a
> restriction that the customer A has to be authenticated lcoally).
> 
> Since the customer, in my case, is on a dedicated ATM subinterface,
> can I direct this customer to use a dedicated virtual-template where I
> mention his dedicated local pool?
> 
> Is it possible that the user gets authenticated locally but gets his
> IP address from RADIUS?
> 
> Any other solution?
> 
> 
> 
> Regards,
> 
> Junaid
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
>