[cisco-bba] A separate Virtual-Template for a PPPoE user

[Junaid]

Yes, I am currently doing local authentication first. However, can I
use vpdn-group and bba-group simultaneously or do I have to migrate
from vpdn to bba altogether. Using vpdn configuration, I am unable to
find a way to use a specific virtual template for a particular port.


-- 

Regards,
Junaid



On Dec 30, 2007 4:44 AM, Tassos Chatzithomaoglou <achatz at forthnet.gr> wrote:
> You can use "aaa authen ppp local group radius" so the local database is searched first.
>
> You can also use different bba-groups (each one uses its own vtemplate) and configure the new one as
> a pppoe group under the customer's interface.
>
> --
> Tassos
>
>
> Junaid wrote on 30/12/2007 1:10 πμ:
>
> > Hi,
> >
> > I am using Cisco 7200 running IOS: c7200-jk9s-mz.123-21. I am
> > authenticating and assigning IP addresses to PPPoE users via RADIUS
> > using "aaa" configurations and a virtual template that handles the
> > pppoe protocol. However, one customer (say customer A) is being
> > treated specially and he is being authenticated locally and gets his
> > ip address via a locally configured pool. Now the problem is that we
> > want to give IP addresses to other PPPoE customers via locally
> > configured pools. How can I ensure that the customer A gets the same
> > IP address every time after being authenticated locally (this is a
> > restriction that the customer A has to be authenticated lcoally).
> >
> > Since the customer, in my case, is on a dedicated ATM subinterface,
> > can I direct this customer to use a dedicated virtual-template where I
> > mention his dedicated local pool?
> >
> > Is it possible that the user gets authenticated locally but gets his
> > IP address from RADIUS?
> >
> > Any other solution?
> >
> >
> >
> > Regards,
> >
> > Junaid
> > _______________________________________________
> > cisco-bba mailing list
> > cisco-bba at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-bba
> >
>