[cisco-bba] PPPoE aggregation on 7600
Tassos Chatzithomaoglou
achatz at forthnet.gr
Mon May 19 13:23:07 EDT 2008
What king of 7600 module do you use for the PPPoE termination?
I think only SIP-400 supports that.
--
Tassos
Tu Vu wrote on 16/5/2008 8:41 μμ:
> I move the working PPPoE configuration from 7200 to 7600 IOS
> 12.2(33)SRC, it does not work, debug pppoe packets does not show
> anything. Pls help.
>
> bba-group pppoe Group-1
> virtual-template 1
> sessions per-mac limit 5
> sessions per-vlan limit 5000
>
> interface GigabitEthernet0/3
> vlan-id dot1q 100
> pppoe enable group Group-1
>
> interface Virtual-Template1
> ip unnumbered Loopback0
> no logging event link-status
> peer ip address forced
> peer default ip address pool LOCAL_POOL
> ppp authentication pap NY-Radius
> ppp authorization NY-Radius
> ppp accounting NY-Radius
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
More information about the cisco-bba
mailing list