[cisco-bba] difference between bba-group and vpdn-group

Andy Saykao andy.saykao at staff.netspace.net.au
Sun May 18 21:35:24 EDT 2008


On one of our LNS, we use the bba-group command to terminate PPP
sessions and on another we use vpdn-group pppoe?
Both are 7301's and running IOS 12.3(17c)
 
The config works on both - is there a difference or do they do the same
thing? Is one preferred over the other???
 
LNS1:
bba-group pppoe global
 virtual-template 2

LNS2:
vpdn-group pppoe
 accept-dialin
  protocol pppoe
  virtual-template 2

Thanks.

This email and any files transmitted with it are confidential and intended solely for the 
use of the individual or entity to whom they are addressed. Please notify the sender 
immediately by email if you have received this email by mistake and delete this email 
from your system. Please note that any views or opinions presented in this email are solely
 those of the author and do not necessarily represent those of the organisation. 
Finally, the recipient should check this email and any attachments for the presence of 
viruses. The organisation accepts no liability for any damage caused by any virus 
transmitted by this email. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-bba/attachments/20080519/76fa410f/attachment.html 


More information about the cisco-bba mailing list