[cisco-bba] avpair for virtual template

[David Suarez - KNET]

Hi Tony,

Do you have and example of this? Commands from cisco and from radius?

Thank you for your interest.

David.




David Suárez Rubio
SISTEMAS DE COMUNICACIÓN

[cid:imagebcc58d.gif at 2fda4f20.0d204647]
[cid:image8a6083.gif at 4743454e.477a459f] Avda. Club Deportivo, 55
26007 Logroño (La Rioja)
T. 902 44 90 90 F. 941 51 93 92
www.knet.es<http://www.knet.es/>

Política de privacidad<http://www.knet.es/mail/politica_privacidad.htm>




De: Tony [mailto:td_miles at yahoo.com]
Enviado el: miércoles, 09 de septiembre de 2009 15:22
Para: cisco-bba at puck.nether.net; David Suarez - KNET
Asunto: Re: [cisco-bba] avpair for virtual template

Hi David,

I'm not sure if there is a RADIUS attribute for virtual-template, someone else may be able to provide you with a definite answer.

As an alternative you could create a template that has all of the standard stuff in it and then groups/users to add anything you need for each connection. Using groups makes this easier to manage.

As an example we do the following:

1. default group - all users are a part of it, specifies things that every connection needs like "framed-protocol=PPP", etc.
2. group per VPN - has the VRF the connection will be part of and the loopback address that it will be associated with (each VRF has it's own loopback that is different)
3. per user attributes - static IP addresses, framed routes, etc that are user specific.

This is done in a heirarchical type manner so that it's fairly easy to manage.

HTH.

regards,
Tony.


--- On Wed, 9/9/09, David Suarez - KNET <david at knet.es> wrote:

Hi all,

Somebody knows if exist a cisco-avpair for virtual templates?

I have a lot of PPPoE sessions inbound my router for the same interface

interface FastEthernet0/0
 ip address 192.168.113.1 255..255.255.0
duplex auto
 speed auto
 pppoe enable group adslpersonal
!
bba-group pppoe adslpersonal
 virtual-template 13
 sessions per-mac limit 1
!

With this solution I only can config one virtual-template for all users, but I would like set one per user or per user-group via RADIUS.
ideas?

And, are there a list of cisco-avpair commands?

Thanks in advance.

Regards.

David..


________________________________
Get more done like never before with Yahoo!7 Mail. Learn more<%20http://au..rd.yahoo.com/mail/newmail_september/*http:/au.overview.mail.yahoo.com/>.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20090910/6bad53d4/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imagebcc58d.gif at 2fda4f20.0d204647
Type: image/gif
Size: 49 bytes
Desc: imagebcc58d.gif at 2fda4f20.0d204647
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20090910/6bad53d4/attachment-0003.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image8a6083.gif at 4743454e.477a459f
Type: image/gif
Size: 2401 bytes
Desc: image8a6083.gif at 4743454e.477a459f
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20090910/6bad53d4/attachment-0004.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imagea18b08.gif at f7b13f12.aee74187
Type: image/gif
Size: 49 bytes
Desc: imagea18b08.gif at f7b13f12.aee74187
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20090910/6bad53d4/attachment-0005.gif>