[cisco-bba] How to reset DSCP/TOS on LNS?

Arie Vayner ariev at vayner.net
Thu Sep 2 03:12:29 EDT 2010


Andy,

You can just apply a policy-map on your Virtual-Template that does "set prec
0" on class-default...

Arie

On Thu, Sep 2, 2010 at 9:22 AM, Andy Saykao <
andy.saykao at staff.netspace.net.au> wrote:

>  Hi All,
>
> I'm looking for a way to re-mark customer packets as it enters/hits the
> LNS.
>
> Eg: cust_1 --upload-->> [ LNS ] --download-->> cust_2
>
> - In my example cust_1 and cust_2 are both on the same LNS.
> - cust_1 is uploading a file to cust_2.
> - Is there a way to reset the DSCP/TOS value of packets coming from cust_1?
>
> LNS is a Cisco 7301 running 12.2(31)SB14.
>
> Thanks.
>
> Andy
>
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> Please notify the sender immediately by email if you have received this
> email by mistake and delete this email from your system. Please note that
> any views or opinions presented in this email are solely those of the author
> and do not necessarily represent those of the organisation. Finally, the
> recipient should check this email and any attachments for the presence of
> viruses. The organisation accepts no liability for any damage caused by any
> virus transmitted by this email.
>
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20100902/3e85aaa0/attachment.html>


More information about the cisco-bba mailing list