[cisco-bba] LNS duty

Arie Vayner ariev at vayner.net
Mon Nov 15 16:42:55 EST 2021


Maybe the newer Catalyst 8300
<https://www.secureitstore.com/datasheets/C8300-Datasheet.pdf>?

On Mon, Nov 15, 2021 at 12:59 PM Erich Hohermuth <erich at hoh.ch> wrote:

> Hi
>
> With this low requirements you could think about a csr1000v (virtual
> gateway combined with a rackmount x86 appliance. This setup split your
> software and hardware dependency and help to optimize your lifecyle. Most
> import
>  it is much easier to get x86 hardware than network appliances today.
>
> Regards
>  Erich
>
> Von Unterwegs
>
> > Am 15.11.2021 um 16:00 schrieb Wayne Lee via cisco-bba <
> cisco-bba at puck.nether.net>:
> >
> > 
> > Hello
> >
> > We are looking at replacing a pair of ASR 1001 which are currently doing
> LNS duty. Our requirements are small (1200 sessions at peak) but expecting
> to double that over 3 years. Throughput is less than 500Mbps on each. What
> is the current Cisco router for LNS duty ?
> >
> >
> > Thanks
> >
> > Wayne
> > _______________________________________________
> > cisco-bba mailing list
> > cisco-bba at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-bba
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-bba/attachments/20211115/00080584/attachment.htm>


More information about the cisco-bba mailing list