[cisco-nas] "annoying" output while "wr mem"

[Dennis Peng]

Yes it is a bug...CSCdz17325. Fixed in 12.2(13.4)T and later.

Dennis

Tassos Chatzithomaoglou [achatz at forthnet.gr] wrote:
> IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(13)T3,  RELEASE SOFTWARE 
> (fc2)
> 
> dial-ath-25#wr mem
> Building configuration...
> This command has no effect on this line; use modem AT commands instead 
> <---------
> [OK]
> 
> 
> Is this supposed to be a bug?
> 
> -- 
> ***********************************
>    Chatzithomaoglou Anastasios
> Network Design & Operations Center
>           FORTHnet S.A.
>       <achatz at forthnet.gr>
> ***********************************
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------