[cisco-nas] radius: "Uniq-Sess-ID"

[Dennis Peng]

It's our new way of tagging VPDN sessions in 12.2(13)T and
later. There might not be a virtual-access interface for the user
anymore since we support sub-interfaces, and even then the full/sub
interface is not known at the time of authentication, so we send the
Unique-Sess-ID which is seen in "show vpdn" and "show sss session".

Dennis

Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> Any idea why i'm getting "Uniq-Sess-IDxxx" as Cisc-Nas-Port on 12.3 routers?
> 
> Jul  8 14:10:06.011: RADIUS:  NAS-Port-Type       [61]  6   Virtual         
> [5]
> Jul  8 14:10:06.011: RADIUS:  Vendor, Cisco       [26]  22
> Jul  8 14:10:06.011: RADIUS:   cisco-nas-port     [2]   16  "Uniq-Sess-ID64"
> Jul  8 14:10:06.011: RADIUS:  NAS-Port            [5]   6   64
> 
> -- 
> ***********************************
>    Chatzithomaoglou Anastasios
> Network Design & Operations Center
>           FORTHnet S.A.
>       <achatz at forthnet.gr>
> ***********************************
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------