[cisco-nas] radius: "Uniq-Sess-ID"

[Anastassios Chatzithomaoglou]

Is there a way i can have "cisco-nas-port" or "NAS-port" represent the Virtual-Access 
number of the user?
So, when the user is in VirtualAccess50, the cisco-nas-port/Nas-Port will be "50".

Dennis Peng wrote:

> It's our new way of tagging VPDN sessions in 12.2(13)T and
> later. There might not be a virtual-access interface for the user
> anymore since we support sub-interfaces, and even then the full/sub
> interface is not known at the time of authentication, so we send the
> Unique-Sess-ID which is seen in "show vpdn" and "show sss session".
> 
> Dennis
> 
> Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> 
>>Any idea why i'm getting "Uniq-Sess-IDxxx" as Cisc-Nas-Port on 12.3 routers?
>>
>>Jul  8 14:10:06.011: RADIUS:  NAS-Port-Type       [61]  6   Virtual         
>>[5]
>>Jul  8 14:10:06.011: RADIUS:  Vendor, Cisco       [26]  22
>>Jul  8 14:10:06.011: RADIUS:   cisco-nas-port     [2]   16  "Uniq-Sess-ID64"
>>Jul  8 14:10:06.011: RADIUS:  NAS-Port            [5]   6   64
>>
>>-- 
>>***********************************
>>   Chatzithomaoglou Anastasios
>>Network Design & Operations Center
>>          FORTHnet S.A.
>>      <achatz at forthnet.gr>
>>***********************************
>>
>>
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas at puck.nether.net
>>http://puck.nether.net/mailman/listinfo/cisco-nas
> 
> 

-- 
***********************************
    Chatzithomaoglou Anastasios
Network Design & Operations Center
           FORTHnet S.A.
       <achatz at forthnet.gr>
***********************************