[cisco-nas] L2TP for MMP

[Rob Lee]

Hi,

I vaguely remember finding a problem where I needed to use -

multilink bundle-name both

can't remember the exact scenario as it was a year to two ago now.

Rob

-----Original Message-----
From: cisco-nas-bounces at puck.nether.net
[mailto:cisco-nas-bounces at puck.nether.net]On Behalf Of Anastassios
Chatzithomaoglou
Sent: 23 July 2003 14:12
To: cisco-nas at puck.nether.net
Subject: [cisco-nas] L2TP for MMP


Since 12.2XA5 i had L2F as the default L2 technology for my SGBP peers.
After upgrading 2 AS5350's to 12.3(1a) i noticed that MMP works by using
the L2TP technology.

Can this change cause any problems to my multilink customers?
Do i have to configure something else?
Can i revert back to L2F?

--
***********************************
    Chatzithomaoglou Anastasios
Network Design & Operations Center
           FORTHnet S.A.
       <achatz at forthnet.gr>
***********************************


_______________________________________________
cisco-nas mailing list
cisco-nas at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nas