[cisco-nas] Telling Actual speed on a Serial Link

[Kevin Gannon]

Sorry Dennis you mentioned before on the list the Mueslix
cards. However I should have asked more speficically the
WIC-1T and WIC-2T cards ?

Regards,
Kevin


-----Original Message-----
From: Dennis Peng [mailto:dpeng at cisco.com]
Sent: 23 July 2003 17:03
To: Kevin Gannon
Cc: cisco-nas at puck.nether.net
Subject: Re: [cisco-nas] Telling Actual speed on a Serial Link


Some serial interfaces (specifically ones using the Mueslix chipset)
can detect the receive clockrate. In "show controller" you would see
something like this:

M1T-T3 pa: show controller:
PAS unit 0, subunit 0, f/w version 3-92, rev ID 0x2800001, version 3
idb = 0x63BB92CC, ds = 0x63BBAA8C, ssb=0x63BBADC0
Clock mux=0x30, ucmd_ctrl=0x0, port_status=0x0
Serial config=0x8, line config=0x1B0202
maxdgram=4584, bufpool=128Kb, 256 particles

   rxLOS inactive, rxLOF inactive, rxAIS inactive
   txAIS active, rxRAI inactive, txRAI inactive
line state: down
cable type : T3  cable, received clockrate 44201430
                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^

Dennis

Kevin Gannon [kgannon at lancomms.ie] wrote:
> Is there some way to see from a show controller serial x/y what speed the
> link is running at or being clocked at. In otherwords to verify what the
> telco has provisioned the link for ?
> 
> Regards,
> Kevin
> 
> **********************************************************************
>  This email and any files transmitted with it are confidential and
>  intended solely for the use of the individual or entity to whom they
>  are addressed. If you have received this email in error please notify
>  the system manager.
>  
>  This footnote also confirms that this email message has been swept for
>  the
>  presence of computer viruses.
>  
>  For more information contact postmaster at lancomms.ie
>  
>  phone + 353 1 4093000
>  
>  fax + 353 1 4093001
> **********************************************************************
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

**********************************************************************
 This email and any files transmitted with it are confidential and
 intended solely for the use of the individual or entity to whom they
 are addressed. If you have received this email in error please notify
 the system manager.
 
 This footnote also confirms that this email message has been swept for
 the
 presence of computer viruses.
 
 For more information contact postmaster at lancomms.ie
 
 phone + 353 1 4093000
 
 fax + 353 1 4093001
**********************************************************************