[cisco-nas] Telling Actual speed on a Serial Link

[Stephen Fisher]

Kevin,

This is not possible on WIC-1T and WIC-2T cards due to the chipset they
use not supporting it.


Stephen Fisher, CCNP
UPS Supply Chain Solutions
Sr. Telcom Engineer
San Francisco Data Center
455 Forbes Blvd.
So San Francisco, CA  94080

Phone: +1 (650) 246-8301
UPS Atlas: 281-8301
UPS FS VoIP: 101-68301
Fax: +1 (650) 875-4145

> -----Original Message-----
> From: kgannon at lancomms.ie [mailto:kgannon at lancomms.ie]
> Sent: Wednesday, July 23, 2003 23:30
> To: dpeng at cisco.com; kgannon at lancomms.ie
> Cc: cisco-nas at puck.nether.net
> Subject: RE: [cisco-nas] Telling Actual speed on a Serial Link
>
>
> Sorry Dennis you mentioned before on the list the Mueslix
> cards. However I should have asked more speficically the
> WIC-1T and WIC-2T cards ?
>
> Regards,
> Kevin
>
>
> -----Original Message-----
> From: Dennis Peng [mailto:dpeng at cisco.com]
> Sent: 23 July 2003 17:03
> To: Kevin Gannon
> Cc: cisco-nas at puck.nether.net
> Subject: Re: [cisco-nas] Telling Actual speed on a Serial Link
>
>
> Some serial interfaces (specifically ones using the Mueslix chipset)
> can detect the receive clockrate. In "show controller" you would see
> something like this:
>
> M1T-T3 pa: show controller:
> PAS unit 0, subunit 0, f/w version 3-92, rev ID 0x2800001, version 3
> idb = 0x63BB92CC, ds = 0x63BBAA8C, ssb=0x63BBADC0
> Clock mux=0x30, ucmd_ctrl=0x0, port_status=0x0
> Serial config=0x8, line config=0x1B0202
> maxdgram=4584, bufpool=128Kb, 256 particles
>
>    rxLOS inactive, rxLOF inactive, rxAIS inactive
>    txAIS active, rxRAI inactive, txRAI inactive
> line state: down
> cable type : T3  cable, received clockrate 44201430
>                         ^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Dennis
>
> Kevin Gannon [kgannon at lancomms.ie] wrote:
> > Is there some way to see from a show controller serial x/y
> what speed the
> > link is running at or being clocked at. In otherwords to
> verify what the
> > telco has provisioned the link for ?
> >
> > Regards,
> > Kevin
> >
> >
> **********************************************************************
> >  This email and any files transmitted with it are confidential and
> >  intended solely for the use of the individual or entity to
> whom they
> >  are addressed. If you have received this email in error
> please notify
> >  the system manager.
> >
> >  This footnote also confirms that this email message has
> been swept for
> >  the
> >  presence of computer viruses.
> >
> >  For more information contact postmaster at lancomms.ie
> >
> >  phone + 353 1 4093000
> >
> >  fax + 353 1 4093001
> >
> **********************************************************************
> > _______________________________________________
> > cisco-nas mailing list
> > cisco-nas at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nas
>
> **********************************************************************
>  This email and any files transmitted with it are confidential and
>  intended solely for the use of the individual or entity to whom they
>  are addressed. If you have received this email in error please notify
>  the system manager.
>
>  This footnote also confirms that this email message has been
> swept for
>  the
>  presence of computer viruses.
>
>  For more information contact postmaster at lancomms.ie
>
>  phone + 353 1 4093000
>
>  fax + 353 1 4093001
> **********************************************************************
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas
>