[cisco-nas] "IOS Interface Blocked by IPv4" bug in a rebuild
ios?
Adam Greene
maillist at webjogger.net
Thu Jul 24 09:37:49 EDT 2003
I'm also running c7200-is-mz.122-15.T5.bin after the IPv4 bug upgrade, and
it's working fine....
----- Original Message -----
From: "Nemeth Laszlo" <csirek at externet.hu>
To: "Mark Johnson" <mljohnso at cisco.com>
Cc: <cisco-nas at puck.nether.net>
Sent: Tuesday, July 22, 2003 1:32 PM
Subject: Re: [cisco-nas] "IOS Interface Blocked by IPv4" bug in a rebuild
ios?
>
> Hello
>
> Sorry, but i don't do your request. This router has big traffic, and I
> don't have time to do this because the router interface soon after reload
> was froze (0-30 min).
>
> I upgraded this router to c7200-is-mz.122-15.T5.bin and it's working fine.
>
> Laci
>
> ps: this is the "sh ver" :
>
> #sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(15)T5, RELEASE SOFTWARE
> (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Wed 11-Jun-03 19:39 by eaarmas
> Image text-base: 0x60008954, data-base: 0x61BF0000
>
> ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
> BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY DEPLOYMENT
> RELEASE SOFTWARE (fc1)
>
> ADSL-Gw uptime is 6 hours, 56 minutes
> System returned to ROM by reload at 12:27:13 CEST Tue Jul 22 2003
> System restarted at 12:29:51 CEST Tue Jul 22 2003
> Running default software
>
> cisco 7206VXR (NPE300) processor (revision D) with 229376K/65536K bytes of
> memory.
> Processor board ID 16079126
> R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
> 6 slot VXR midplane, Version 2.0
>
> Last reset from power-on
> Channelized E1, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> Primary Rate ISDN software, Version 1.1.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 17 Serial network interface(s)
> 4 Channelized E1/PRI port(s)
> 125K bytes of non-volatile configuration memory.
>
> 62592K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
> 4096K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x2102
>
>
>
> > >I upgraded my 7200 router with a rebuild ios: c7200-is-mz.122-16.B1.bin
> > >
> > >A few minute later the router fastethernet interface was froze:
> > >
> > >Input queue: 76/75/50475/0 (size/max/drops/flushes); Total output
drops: 0
> >
> > Can you please send me <sh ver> and <sh buff in fast XX packet> please?
> >
> > Thanks,
> >
> > mark
> >
> >
> >
>
>
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas
> ---
> [This e-mail was scanned for viruses by Webjogger's AntiVirus Protection
System]
>
>
---
[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]
More information about the cisco-nas
mailing list