[cisco-nas] "IOS Interface Blocked by IPv4" bug in a rebuild ios?

[Anastassios Chatzithomaoglou]

Has anyone tried c7200-is-mz.122-15.T5 on a 7200 used as an LNS?
Are there any known bugs?

Adam Greene wrote:

> I'm also running c7200-is-mz.122-15.T5.bin after the IPv4 bug upgrade, and
> it's working fine....
> 
> ----- Original Message -----
> From: "Nemeth Laszlo" <csirek at externet.hu>
> To: "Mark Johnson" <mljohnso at cisco.com>
> Cc: <cisco-nas at puck.nether.net>
> Sent: Tuesday, July 22, 2003 1:32 PM
> Subject: Re: [cisco-nas] "IOS Interface Blocked by IPv4" bug in a rebuild
> ios?
> 
> 
> 
>>Hello
>>
>>Sorry, but i don't do your request. This router has big traffic, and I
>>don't have time to do this because the router interface soon after reload
>>was froze (0-30 min).
>>
>>I upgraded this router to c7200-is-mz.122-15.T5.bin and it's working fine.
>>
>>Laci
>>
>>ps: this is the "sh ver" :
>>
>>#sh ver
>>Cisco Internetwork Operating System Software
>>IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(15)T5,  RELEASE SOFTWARE
>>(fc1)
>>TAC Support: http://www.cisco.com/tac
>>Copyright (c) 1986-2003 by cisco Systems, Inc.
>>Compiled Wed 11-Jun-03 19:39 by eaarmas
>>Image text-base: 0x60008954, data-base: 0x61BF0000
>>
>>ROM: System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
>>BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY DEPLOYMENT
>>RELEASE SOFTWARE (fc1)
>>
>>ADSL-Gw uptime is 6 hours, 56 minutes
>>System returned to ROM by reload at 12:27:13 CEST Tue Jul 22 2003
>>System restarted at 12:29:51 CEST Tue Jul 22 2003
>>Running default software
>>
>>cisco 7206VXR (NPE300) processor (revision D) with 229376K/65536K bytes of
>>memory.
>>Processor board ID 16079126
>>R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
>>6 slot VXR midplane, Version 2.0
>>
>>Last reset from power-on
>>Channelized E1, Version 1.0.
>>Bridging software.
>>X.25 software, Version 3.0.0.
>>Primary Rate ISDN software, Version 1.1.
>>2 FastEthernet/IEEE 802.3 interface(s)
>>17 Serial network interface(s)
>>4 Channelized E1/PRI port(s)
>>125K bytes of non-volatile configuration memory.
>>
>>62592K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
>>4096K bytes of Flash internal SIMM (Sector size 256K).
>>Configuration register is 0x2102
>>
>>
>>
>>
>>>>I upgraded my 7200 router with a rebuild ios: c7200-is-mz.122-16.B1.bin
>>>>
>>>>A few minute later the router fastethernet interface was froze:
>>>>
>>>>Input queue: 76/75/50475/0 (size/max/drops/flushes); Total output
> 
> drops: 0
> 
>>>Can you please send me <sh ver> and <sh buff in fast XX packet> please?
>>>
>>>Thanks,
>>>
>>>mark
>>>
>>>
>>>
>>
>>
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas at puck.nether.net
>>http://puck.nether.net/mailman/listinfo/cisco-nas
>>---
>>[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection
> 
> System]
> 
>>
> 
> ---
> [This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas
> 

-- 
***********************************
    Chatzithomaoglou Anastasios
Network Design & Operations Center
           FORTHnet S.A.
       <achatz at forthnet.gr>
***********************************