[cisco-nas] multilink on unequal links

[Anastassios Chatzithomaoglou]

Dennis Peng wrote:

> Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> 
>>We have 2 serial links, one 2 Mbps kai one 512 Kbps.
>>
>>If we make a multink interface consisting of these 2, how will it work 
>>after the 512kbps barrier?
> 
> 
> We will send 4 times the number of bytes on the 2Mbps link as compared
> to the 512kbps link. This should provide proper load
> distribution. "show ppp multilink" should show some information
> pertaining to this.
> 

So when the 1st link is 80% full, the 2nd link will be 80% too?
Does it depend on the "bandwidth" interface command?


> Dennis
> 
> 
>>-- 
>>***********************************
>>   Chatzithomaoglou Anastasios
>>Network Design & Operations Center
>>          FORTHnet S.A.
>>      <achatz at forthnet.gr>
>>***********************************
>>
>>
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas at puck.nether.net
>>http://puck.nether.net/mailman/listinfo/cisco-nas
> 
> 

-- 
***********************************
    Chatzithomaoglou Anastasios
Network Design & Operations Center
           FORTHnet S.A.
       <achatz at forthnet.gr>
***********************************