[cisco-nas] multilink on unequal links

[Dennis Peng]

Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> 
> 
> Dennis Peng wrote:
> 
> >Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> >
> >>We have 2 serial links, one 2 Mbps kai one 512 Kbps.
> >>
> >>If we make a multink interface consisting of these 2, how will it work 
> >>after the 512kbps barrier?
> >
> >
> >We will send 4 times the number of bytes on the 2Mbps link as compared
> >to the 512kbps link. This should provide proper load
> >distribution. "show ppp multilink" should show some information
> >pertaining to this.
> >
> 
> So when the 1st link is 80% full, the 2nd link will be 80% too?

That is my understanding.

> Does it depend on the "bandwidth" interface command?

Yes.

Dennis

> 
> >Dennis
> >
> >
> >>-- 
> >>***********************************
> >>  Chatzithomaoglou Anastasios
> >>Network Design & Operations Center
> >>         FORTHnet S.A.
> >>     <achatz at forthnet.gr>
> >>***********************************
> >>
> >>
> >>_______________________________________________
> >>cisco-nas mailing list
> >>cisco-nas at puck.nether.net
> >>http://puck.nether.net/mailman/listinfo/cisco-nas
> >
> >
> 
> -- 
> ***********************************
>    Chatzithomaoglou Anastasios
> Network Design & Operations Center
>           FORTHnet S.A.
>       <achatz at forthnet.gr>
> ***********************************

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------