[cisco-nas] STOP acct record not sent

[Dennis Peng]

No, you shouldn't need anything extra in the config. I ran a quick
test and didn't see this behaviour in 12.2(6i). Could you send me your
config and the output of "debug ppp negot", "debug vpdn l2x-ev",
"debug aaa accounting", and "debug radius" when you manually clear the
interface?

Dennis

Anastassios Chatzithomaoglou [achatz at forthnet.gr] wrote:
> We have a 7200 (12.2(6i)) used as a LNS for our DSL customers and we have 
> noticed the following problem.
> 
> The customers are connected though L2TP to virtual-access interfaces. If 
> the session-timeout of the va interface expires, a stop acct packet is sent 
> to our radius server (fine until here).
> But if i clear manually the va interface ("clear int vi779"), then there is 
> no stop acct record sent.
> Am i missing something in the config?
> 
> 
> -- 
> ***********************************
>    Chatzithomaoglou Anastasios
> Network Design & Operations Center
>           FORTHnet S.A.
>       <achatz at forthnet.gr>
> ***********************************
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nas

-- 
-------------------------------------------------------------------------
      ||        ||                                 Dennis Peng
      ||        ||        Cisco Systems, Inc.      Escalation Engineer
     ||||      ||||       170 West Tasman Drive    Phone: (408) 526-6143
 ..:||||||:..:||||||:..   San Jose, CA 95134       Fax:   (408) 232-2343
   Cisco Systems Inc.                              dpeng at cisco.com
-------------------------------------------------------------------------