[cisco-nas] 5350 modem stuck in 'active' state
James Savage
jsavage at yorku.ca
Wed Jun 25 09:06:02 EDT 2003
Hi,
I'm running 12.2(2)XA5. A reload fixed the problem and we're already planning
to move to 12.2(15)T2....we just have to iron out some TACACS+ stuff.
Hopefully, as you suggest, it's CSCdw61734-related and will nicely disappear
when we upgrade.
.......thanks for your help........Jamie
On Tue, 24 Jun 2003, Dennis Peng wrote:
> What version are you running? This could be an instance of CSCdw61734
> which is fixed in 12.2(13)T and later on the AS5350. Unfortunately,
> the only way to clear the condition is a reload.
>
> Dennis
>
> James Savage [jsavage at yorku.ca] wrote:
> > Hi,
> > I have a modem stuck in active mode on a 5350 as shown below. Clearing the
> > SPE does not have any affect. Is there another way of fixing this short of
> > reloading the 5350?
> >
> > ........thanks in advance.........Jamie
> >
> >
> > SPE settings:
> > ==============
> > Country code configuration: default T1 (u Law)
> > History log events: 50(per port)
> > Port legends:
> > ============
> > Port state: (s)shutdown (t)test (r)recovery (d)download
> > (b)busiedout (p)busyout pending, (B)bad (a)active call
> > Call type: (m)modem (d)digital (f)fax-relay (v)voice (_)not in use
> > System resources summary:
> > ======================
> > Total ports: 216, in use ports: 0, disabled ports: 4, free ports: 212
> > Total active calls: modem 0, voice 0, digital 0, fax-relay 0
> >
> > SPE SPE SPE SPE Port Call
> > SPE# Port # State Busyout Shut Crash State Type
> > 2/00 0000-0005 ACTIVE 0 0 0 ______ ______
> > 2/01 0006-0011 ACTIVE 0 0 0 ______ ______
> > 2/02 0012-0017 ACTIVE 0 0 0 ______ ______
> > 2/03 0018-0023 ACTIVE 0 0 0 ______ ______
> > 2/04 0024-0029 ACTIVE 0 0 0 ____a_ ______
> > 2/05 0030-0035 ACTIVE 0 0 0 ______ ______
> > 2/06 0036-0041 ACTIVE 0 0 0 ______ ______
> > 2/07 0042-0047 ACTIVE 0 0 0 ______ ______
> > 2/08 0048-0053 ACTIVE 0 0 0 ______ ______
> > 2/09 0054-0059 ACTIVE 0 0 0 ______ ______
> > 2/10 0060-0065 ACTIVE 0 0 0 ______ ______
> > 2/11 0066-0071 ACTIVE 0 0 0 ______ ______
> > 2/12 0072-0077 ACTIVE 0 0 0 ______ ______
> > 2/13 0078-0083 ACTIVE 0 0 0 ______ ______
> > 2/14 0084-0089 ACTIVE 0 0 0 ______ ______
> > 2/15 0090-0095 ACTIVE 0 0 0 ______ ______
> > 2/16 0096-0101 ACTIVE 0 0 0 ______ ______
> > 2/17 0102-0107 ACTIVE 0 0 0 ______ ______
> >
> >
> > sho line 2/28
> > Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
> > I 2/28 Digital modem - DialIn - - - 3788 0 0/0 -
> >
> > Line 2/28, Location: "***", Type: "vt100"
> > Length: 24 lines, Width: 80 columns
> > Status: No Exit Banner, Modem Detected, CTS Raised
> > Capabilities: No Flush-at-Activation, Hardware Flowcontrol In
> > Hardware Flowcontrol Out, Modem RI is CD, Line usable as async interface
> > Output non-idle, Modem Autoconfigure, Integrated Modem
> > Modem state: Idle
> > modem(slot/port)=2/28, state=IDLE
> > dsx1(slot/unit/channel)=NONE,
> > status=VDEV_STATUS_ACTIVE_WDT.VDEV_STATUS_ACTIVE_CALL.VDEV_STATUS_NEGOTIATED.
> > Modem hardware state: DTR noDCD CTS RTS
> > Group codes: 0
> > TCP/IP header compression enabled
> > Special Chars: Escape Hold Stop Start Disconnect Activation
> > ^^x none - - none
> > Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch
> > 00:10:00 00:30:00 08:00:00 not set
> > Session idle time reset by output.
> > Idle Session Disconnect Warning
> > never
> > Login-sequence User Response
> > 00:00:30
> > Autoselect Initial Wait
> > not set
> > Modem type is no_v92.
> > Session limit is not set.
> > Time since activation: never
> > Editing is enabled.
> > History is enabled, history size is 10.
> > DNS resolution in show commands is enabled
> > Full user help is disabled
> > Allowed input transports are lat pad telnet rlogin udptn v120 lapb-ta.
> > Allowed output transports are lat pad telnet rlogin v120 lapb-ta.
> > Preferred transport is lat.
> > No output characters are padded
> > No special data dispatching characters
> >
> >
> > James Savage York University
> > Senior Com. Tech. 108 Steacie Bldg.
> > jsavage at yorku.ca 4700 Keele Street
> > phone: 416-736-2100 ext.22605 Toronto, Ontario
> > fax: 416-736-5701 M3J 1P3, CANADA
> > /\ /\ /\ /\
> > / \ / \ / \ / \
> > \ / \ / \ /
> > \/ \/ \/
> >
> > _______________________________________________
> > cisco-nas mailing list
> > cisco-nas at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nas
>
> --
> -------------------------------------------------------------------------
> || || Dennis Peng
> || || Cisco Systems, Inc. Escalation Engineer
> |||| |||| 170 West Tasman Drive Phone: (408) 526-6143
> ..:||||||:..:||||||:.. San Jose, CA 95134 Fax: (408) 232-2343
> Cisco Systems Inc. dpeng at cisco.com
> -------------------------------------------------------------------------
>
James Savage York University
Senior Com. Tech. 108 Steacie Bldg.
jsavage at yorku.ca 4700 Keele Street
phone: 416-736-2100 ext.22605 Toronto, Ontario
fax: 416-736-5701 M3J 1P3, CANADA
/\ /\ /\ /\
/ \ / \ / \ / \
\ / \ / \ /
\/ \/ \/
More information about the cisco-nas
mailing list