[cisco-nas] Re: nas-tx-speed & nas-rx-speed reversed?

[Dennis Peng]

Yes, this is a bug. I'll look into it.

Dennis

Tassos Chatzithomaoglou [achatz at forthnet.gr] wrote:
> And these are the debug logs which show the problem...
> 
> ...
> Nov 10 19:00:29.057: RADIUS:  Ascend-Xmit-Rate    [255] 6   28800
> Nov 10 19:00:29.061: RADIUS:  Ascend-Data-Rate    [197] 6   46666
> ...
> Nov 10 19:00:29.065: RADIUS:  Connect-Info        [77]  29  "46666/28800 
> V90/V42bis/LAPM"
> 
> Ascend-Xmit-Rate = nas-tx-speed
> Ascend-Data-Rate = nas-rx-speed
> 
> Tassos Chatzithomaoglou wrote:
> >We moved from 12.2.2XA5 to 12.2.15T7 and we have noticed the following 
> >"bug".
> >
> >Now, in our radius acct records we get the following records
> >0 < nas-rx-speed < 56000
> >0 < nas-tx-speed < 33600
> >
> >while with the previous ios, we got the following:
> >
> >0 < nas-tx-speed < 56000
> >0 < nas-rx-speed < 33600
> >
> >I believe nas-tx-speed is the speed from the NAS to the user, so the 
> >previous records were the correct ones.
> >
> >Have these 2 been reversed? Is it a known bug?
> >
> 
> -- 
> ***********************************
>    Chatzithomaoglou Anastasios
> Network Design & Operations Center
>           FORTHnet S.A.
>       <achatz at forthnet.gr>
> ***********************************
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas