[cisco-nas] RADIUS IP Question

[Dave Lechlitner]

We use Funk's Steel Belted RADIUS v04.00.248 to terminate PPP traffic on our NAS's.  We have AS5400s, AS5800, and 6400s.  I recently moved the handing out of dynamic IP addresses off of RADIUS and locally onto the NAS's using the "IP local pool" command.

Ever since the change, I've noticed that I no longer get the dynamic IP address noted in the RADIUS accounting records.  Other non-Cisco NAS's are configured in a similar manner where they hand out the IPs themselves and I do get the IP address in the RADIUS accounting logs.

I'm sure I must be missing some AAA or RADIUS command to correct this.  Any advice?

6400 config portions:

aaa new-model
aaa authentication ppp default local group radius
aaa authorization network default local group radius
aaa accounting network default start-stop group radius       
!
interface Virtual-Template1
 ip unnumbered Loopback0
 no logging event link-status
 load-interval 30
 no snmp trap link-status
 peer default ip address pool dyn-pool
 ppp authentication pap         
!
ip local pool dyn-pool xxx.xxx.xxx.1 xxx.xxx.xxx.254 (actual IP replaced with "x")
!
ip radius source-interface Loopback0
!
radius-server host xxx.xxx.xxx.10 auth-port 1645 acct-port 1646 key 7 xxxxxxxxxx
radius-server retransmit 3 


Thanks,

Dave



**DISCLAIMER
This e-mail message and any files transmitted with it are intended for the use of the individual or entity to which they are addressed and may contain information that is privileged, proprietary and confidential. If you are not the intended recipient, you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received this communication in error, please notify the sender and delete this e-mail message. The contents do not represent the opinion of D&E except to the extent that it relates to their official business.