[cisco-nas] 3620 "invisible" typing

[Bryan Deaver]

So this happens ever time you hit this particular vty?  Might be CSCdz36877.
Release-note below.

Bryan



Under rare circumstances it may be possible that the exec session associated
with a virtual terminal can get into a state where characters entered by
the user will not be echoed back.

Using authentication on the line makes this less likely to occur,
but the problem may reappear after opening and closing a connection
to another host.

Authenticating again, using the login exec command, even if already
authenticated, or entering enable mode, will restore the echo
on the line. 



> From: Tassos Chatzithomaoglou <achatz at forthnet.gr>
> Organization: FORTHnet S.A.
> Date: Wed, 22 Oct 2003 08:09:51 +0300
> To: cisco-nas <cisco-nas at puck.nether.net>
> Subject: [cisco-nas] 3620 "invisible" typing
> 
> I have a 3620 with 12.1(5)T10 and sometimes i can't see what i'm typing while
> i'm logged 
> into a vty. This is a sample output while logging into and doing "who".
> 
> ---------------------------------------------------------
> Username:
> Password:
> 
> router>
>    Line       User       Host(s)              Idle       Location
>  65 aux 0                idle                 00:01:54
> * 67 vty 1     achatz     idle                 00:00:00
> ---------------------------------------------------------
> 
> 
> Are there any bug references?
> 
> -- 
> ***********************************
>   Chatzithomaoglou Anastasios
> Network Design & Operations Center
>          FORTHnet S.A.
>      <achatz at forthnet.gr>
> ***********************************
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas