[cisco-nas] Trouble

[Aaron Leonard]

conf term
 service timestamp debug date msec
 service timestamp log date msec
 modem call-record terse
 no logging console
 line con 0
   no logging synchronous
   end

debug isdn q931
debug modem csm
debug modem
debug ppp negotiation
debug aaa authorization
debug ip peer
debug radius

term moni (log your session to a file)

attempt to dial in, and then fail to get an ip address.  Then
let's find the MCR that corresponds to your call, then use that
MCR as an index back into the debugs to see what happened.

Aaron

---

> Hello:
> I have two cities pulling to one location. I have a Cisco AS5396 with 4 pri.
> Two of the pris are for one city and two are for another. Users are logging
> on and getting authenticated but never receive an IP after getting on. Here
> is the config. I would really appreciate any help that you could give me.

> !
> version 12.2
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname sas1
> !
> aaa new-model
> aaa authentication login default local
> aaa authentication ppp default group radius
> aaa authorization network default group radius if-authenticated
> aaa accounting delay-start
> aaa accounting update newinfo
> aaa accounting exec default start-stop group radius
> aaa accounting network default start-stop group radius
> enable secret 5 XXXXXXXX
> enable password XXXXXXXX
> !
> username super password 0 XXXXXXXX
> spe 1/0 2/9
>  firmware location system:/ucode/mica_port_firmware
> !
> !
> resource-pool disable
> !
> modem country mica usa
> ip subnet-zero
> ip domain-list reliable-net.net
> ip domain-name reliable-net.net
> ip name-server 67.39.157.3
> !
> async-bootp dns-server 67.39.157.3 65.88.128.2
> isdn switch-type primary-ni
> !
> controller T1 0
>  framing esf
>  clock source line primary
>  linecode b8zs
>  pri-group timeslots 1-24
> !
> controller T1 1
>  framing esf
>  linecode b8zs
>  pri-group timeslots 1-24
> !
> controller T1 2
>  framing esf
>  linecode b8zs
>  pri-group timeslots 1-24
> !
> controller T1 3
>  framing esf
>  clock source line secondary 1
>  linecode b8zs
>  pri-group timeslots 1-24
> !
> !
> interface Ethernet0
>  no ip address
>  shutdown
> !
> interface Serial0:23
>  ip unnumbered FastEthernet0
>  encapsulation ppp
>  dialer idle-timeout 450
>  dialer-group 1
>  isdn switch-type primary-ni
>  isdn incoming-voice modem
>  peer default ip address pool setup_pool
>  ppp authentication chap pap
>  ppp multilink
> !
> interface Serial1:23
>  ip unnumbered FastEthernet0
>  encapsulation ppp
>  dialer idle-timeout 450
>  dialer-group 1
>  isdn switch-type primary-ni
>  isdn incoming-voice modem
>  peer default ip address pool setup_pool
>  ppp authentication chap pap
>  ppp multilink
> !
> interface Serial2:23
>  ip unnumbered FastEthernet0
>  encapsulation ppp
>  dialer idle-timeout 450
>  dialer-group 1
>  isdn switch-type primary-ni
>  isdn incoming-voice modem
>  peer default ip address pool setup_pool
>  ppp authentication chap pap
>  ppp multilink
> !
> interface Serial3:23
>  ip unnumbered FastEthernet0
>  encapsulation ppp
>  dialer idle-timeout 450
>  dialer-group 1
>  isdn switch-type primary-ni
>  isdn incoming-voice modem
>  peer default ip address pool setup_pool
>  ppp authentication chap pap
>  ppp multilink
> !
> interface FastEthernet0
>  ip address 67.39.157.6 255.255.255.0
>  duplex auto
>  speed auto
> !
> interface Group-Async1
>  ip unnumbered FastEthernet0
>  encapsulation ppp
>  no ip route-cache
>  ip tcp header-compression
>  no ip mroute-cache
>  async mode interactive
>  peer default ip address pool setup_pool
>  ppp authentication chap pap
>  group-range 1 120
> !
> interface Dialer0
>  no ip address
>  no ip route-cache
>  no ip mroute-cache
>  no cdp enable
> !
> ip local pool setup_pool 67.39.157.10 67.39.157.109
> ip default-gateway 67.39.157.1
> ip classless
> ip route 0.0.0.0 0.0.0.0 67.39.157.1
> no ip http server
> !
> access-list 101 permit ip any any
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx permit
> !
> snmp-server community smartinsville RO
> snmp-server enable traps tty
> radius-server host 67.39.157.2 auth-port 1645 acct-port 1646
> radius-server host 67.39.157.3 auth-port 1645 acct-port 1646
> radius-server retransmit 5
> radius-server timeout 3
> radius-server key tsz001
> !
> line con 0
>  exec-timeout 0 0
>  logging synchronous
> line 1 120
>  no flush-at-activation
>  modem Dialin
>  transport input all
>  autoselect during-login
>  autoselect ppp
> line aux 0
>  password XXXXXXXX
>  script startup modem-init
>  modem InOut
>  transport input all
>  speed 38400
>  flowcontrol hardware
> line vty 0 4
>  password XXXXXXXX
> !
> end

> William L. Edwards
> President/CEO
> RNet Communications
> 765-342-3554
> www.rnetinc.net
> wedwards at rnetinc.net

> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas