[cisco-nas] AS5200 ISDN idle timeout problem

[Anastassios Chatzithomaoglou]

120 is the default timeout ;-)
This is why it is not shown....


Aragon Gouveia wrote:

> Hi,
> 
> I have an AS5200 (yea, I know) running IOS 12.1.20.  It's accepting ISDN
> calls fine, but persistently disconnects them 2 minutes after connecting
> regardless of line activity.  Reason for disconnection in radius accounting
> logs is "Idle-Timeout".
> 
> The idle timeout period is not being set from anywhere in the NAS's
> configuration (that I can see), and neither from radius.  If I do a "show
> interface" on a connected interface it does register line activity in the
> "Last input" and "Last output" counters.  However, the idle timeout counter
> is never reset and eventually runs down to 0 when the line is disconnected.
> 
> Anyone know why this is happening?
> 
> 
> Thanks,
> Aragon
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
> 

-- 
***********************************
    Chatzithomaoglou Anastasios
Network Design & Operations Center
           FORTHnet S.A.
       <achatz at forthnet.gr>
***********************************