[cisco-nas] user-specific config on aaa server for pptp

[Oliver Boehmer (oboehmer)]

> i know that you can configure user specific interface config on a aaa
> server for l2tp. is this also possible for pptp?
> 
> if i put this on the aaa server:
> 
> cisco-avpair = "lcp:interface-config=ip address 192.168.1.1
> 255.255.255.0" 
> 
> and then config'd 'virtual-profiles aaa' on the router, would this
> work?? 

"virtual-profile aaa" is not used on LNS (virtual-profiles are only
used/needed on dial platforms), but lcp:interface-config should work for
ppptp termination as well (never tried this, but I see no reason why it
wouldn't work)

	oli