[cisco-nas] How can I telnet to my NAS server with NAT configuration

[Souphonh]

Dear Sir,

Accessing to the NAS from 192.168.100.0 (inside NAT) is OK. However, I would
like to access to NAS from 10.0.3.0 (outside NAT). How can I do that ?

Regards,
Souphonh
----- Original Message ----- 
From: "Dennis Peng" <dpeng at cisco.com>
To: "Souphonh" <souphonh at laopdr.com>
Cc: <cisco-nas at puck.nether.net>
Sent: Tuesday, April 27, 2004 1:15 AM
Subject: Re: [cisco-nas] How can I telnet to my NAS server with NAT
configuration


> Try changing:
>
> access-list 1 permit any
>
> to
>
> access-list 1 permit 192.168.100.0 0.0.0.255
>
> Dennis
>
> Souphonh [souphonh at laopdr.com] wrote:
> > Dear Sir,
> >
> > The attachment is my dial-in (NAS) server configuration. The
configuration works fine for PPP dial-in purpose. However, I cannot telnet
to my server via its ethernet 0/0 interface, which is configured as NAT
outside. Is there any way that allow me to access my NAS via that interface
?
> >
> > Regards,
> > Souphonh
> > Current configuration : 2196 bytes
> > !
> > version 12.2
> > service timestamps debug datetime msec
> > service timestamps log datetime msec
> > service password-encryption
> > !
> > hostname lpb_ras
> > !
> > aaa new-model
> > aaa authentication login default local
> > aaa authentication ppp default group radius local
> > aaa authorization network default group radius if-authenticated
> > aaa accounting network default start-stop group radius
> > enable secret 5 $1$RLt8$zpVnFUtCBXkbq2/hb1YdA/
> > enable password 7 03140B07145B32184A04480B
> > !
> > username test password 7 00141215174C0F
> > username admin password 7 0014430A160F18520B2C1D40
> > ip subnet-zero
> > !
> > !
> > ip domain-name mydomain.com
> > ip name-server xxx.xxx.xxx.xxx
> > ip name-server xxx.xxx.xxx.xxx
> > ip name-server xxx.xxx.xxx.xxx
> > !
> > ip audit notify log
> > ip audit po max-events 100
> > async-bootp dns-server xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
> > !
> > call rsvp-sync
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > !
> > interface Loopback0
> >  ip address 192.168.100.1 255.255.255.0
> >  ip nat inside
> > !
> > interface Ethernet0/0
> >  ip address 10.0.3.124 255.255.255.0
> >  ip nat outside
> >  half-duplex
> >  no mop enabled
> > !
> >
> >
> > interface Group-Async1
> >  ip unnumbered Loopback0
> >  ip nat inside
> >  encapsulation ppp
> >  ip tcp header-compression
> >  async mode interactive
> >  peer default ip address pool dialin_pool
> >  ppp authentication chap pap
> >  group-range 33 48
> > !
> > ip local pool dialin_pool 192.168.100.2 192.168.100.20
> > ip nat inside source list 1 interface Ethernet0/0 overload
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 10.0.3.219
> > no ip http server
> > !
> > access-list 1 permit any
> > dialer-list 1 protocol ip permit
> > dialer-list 1 protocol ipx permit
> > !
> > snmp-server community public RO
> > snmp-server enable traps tty
> > radius-server host 202.47.226.10 auth-port 1812 acct-port 1813
> > radius-server key 7 0208107B1D050D
> > radius-server vsa send accounting
> > radius-server vsa send authentication
> > !
> > dial-peer cor custom
> > !
> > !
> > !
> > !
> > !
> > line con 0
> > line 33 48
> >  flush-at-activation
> >  modem Dialin
> >  autoselect during-login
> >  autoselect ppp
> >  flowcontrol hardware
> > line aux 0
> > line vty 0 4
> >  password 7 1209551B005F1F502E267526
> > !
> > end
> >
>
> > _______________________________________________
> > cisco-nas mailing list
> > cisco-nas at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nas
>
>