[cisco-nas] How can I telnet to my NAS server with NAT configuration

[Tassos Chatzithomaoglou]

Quite a strange suggestion....

"any" doesn't include "192.168.100.0 0.0.0.255" ?


Dennis Peng wrote:

> Try changing:
> 
> access-list 1 permit any
> 
> to
> 
> access-list 1 permit 192.168.100.0 0.0.0.255
> 
> Dennis
> 
> Souphonh [souphonh at laopdr.com] wrote:
> 
>>Dear Sir,
>>
>>The attachment is my dial-in (NAS) server configuration. The configuration works fine for PPP dial-in purpose. However, I cannot telnet to my server via its ethernet 0/0 interface, which is configured as NAT outside. Is there any way that allow me to access my NAS via that interface ? 
>>
>>Regards,
>>Souphonh
>>Current configuration : 2196 bytes
>>!
>>version 12.2
>>service timestamps debug datetime msec
>>service timestamps log datetime msec
>>service password-encryption
>>!
>>hostname lpb_ras
>>!
>>aaa new-model
>>aaa authentication login default local
>>aaa authentication ppp default group radius local
>>aaa authorization network default group radius if-authenticated
>>aaa accounting network default start-stop group radius
>>enable secret 5 $1$RLt8$zpVnFUtCBXkbq2/hb1YdA/
>>enable password 7 03140B07145B32184A04480B
>>!
>>username test password 7 00141215174C0F
>>username admin password 7 0014430A160F18520B2C1D40
>>ip subnet-zero
>>!
>>!
>>ip domain-name mydomain.com
>>ip name-server xxx.xxx.xxx.xxx
>>ip name-server xxx.xxx.xxx.xxx
>>ip name-server xxx.xxx.xxx.xxx
>>!
>>ip audit notify log
>>ip audit po max-events 100
>>async-bootp dns-server xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
>>!
>>call rsvp-sync
>>!
>>!
>>!
>>!
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 192.168.100.1 255.255.255.0
>> ip nat inside
>>!
>>interface Ethernet0/0
>> ip address 10.0.3.124 255.255.255.0
>> ip nat outside
>> half-duplex
>> no mop enabled
>>!
>>
>>
>>interface Group-Async1
>> ip unnumbered Loopback0
>> ip nat inside
>> encapsulation ppp
>> ip tcp header-compression
>> async mode interactive
>> peer default ip address pool dialin_pool
>> ppp authentication chap pap
>> group-range 33 48
>>!
>>ip local pool dialin_pool 192.168.100.2 192.168.100.20
>>ip nat inside source list 1 interface Ethernet0/0 overload
>>ip classless
>>ip route 0.0.0.0 0.0.0.0 10.0.3.219
>>no ip http server
>>!
>>access-list 1 permit any
>>dialer-list 1 protocol ip permit
>>dialer-list 1 protocol ipx permit
>>!
>>snmp-server community public RO
>>snmp-server enable traps tty
>>radius-server host 202.47.226.10 auth-port 1812 acct-port 1813
>>radius-server key 7 0208107B1D050D
>>radius-server vsa send accounting
>>radius-server vsa send authentication
>>!
>>dial-peer cor custom
>>!
>>!
>>!
>>!
>>!
>>line con 0
>>line 33 48
>> flush-at-activation
>> modem Dialin
>> autoselect during-login
>> autoselect ppp
>> flowcontrol hardware
>>line aux 0
>>line vty 0 4
>> password 7 1209551B005F1F502E267526
>>!
>>end
>>
> 
> 
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nas
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
> 

-- 
***************************************
       Chatzithomaoglou Anastasios
Network Design & Development Department
              FORTHnet S.A.
          <achatz at forthnet.gr>
***************************************