AW: [cisco-nas] Max. ring time for analog calls

[Daniel Ruch]

Hi Aaron

Thank's for your reply. I've already tested the S7, but this timer waits
"only" for carrier detect. Ring time is still 60 seconds.

Daniel

-----Ursprüngliche Nachricht-----
Von: Aaron Leonard [mailto:AARON at cisco.com] 
Gesendet: Donnerstag, 26. August 2004 18:50
An: Daniel Ruch
Cc: cisco-nas at puck.nether.net
Betreff: Re: [cisco-nas] Max. ring time for analog calls

> Hi there,

 

> Cisco 3640 with Mica modems:

> Is there a way to limit the max. ring time for outgoing analog calls?
> Default ring time is appr. 60 sec. when the other side is not 
> answering the call. I'd like to decrease this time to 10-15 seconds.

 

> Thank's for any help.

Sounds like you're looking for S7.  

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/sw_conf
/sw_ports/at_set/atcmnds.htm#4061

Remember that MICA isn't really listening for ringback tone to end in order
to tell that the called party has answered ... it is relying upon IOS to see
some answer supervision signal from the circuit switch (such as a Q.931
CONNECT).

Aaron