[cisco-nas] 7206VXR show proc cpu question.

[Erick B.]

Gert and everyone else who sent me offline messages,

Thanks for the reply. I realize this is interrupts but
was trying to get a better break down / explaination
of exactly where the 15% was coming from since my
client wants a better breakdown. I realize 15% isn't
much and is good for what they have installed and
configured. 

Regards.

--- Gert Doering <gert at greenie.muc.de> wrote:
> Hi,
> 
> On Tue, Jan 06, 2004 at 09:10:51PM -0800, Erick B.
> wrote:
> > router#show proc cpu 
> > 
> > CPU utilization for five seconds: 15%/15%; one
> minute:
> > 15%; five minutes: 13% 
> 
> That's IRQ load -> packet forwarding in the fast
> path, which isn't
> accounted towareds any processes.
> 
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                     
>       //www.muc.de/~gert/
> Gert Doering - Munich, Germany                      
>       gert at greenie.muc.de
> fax: +49-89-35655025                       
gert at net.informatik.tu-muenchen.de


__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus