[cisco-nas] AS5350 E1 back to back

[EKNUDSON at houston.rr.com]

Rivo,

If I remember correctly, you'll have to set the clock via a global command, 'dial-tdm-clock' or 'tdm-clock.' Here's a good doc on access server clocking:

http://cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a008014f8a6.shtml

Eric

----- Original Message -----
From: Rivo Tahina RAZAFINDRATSIFA <r.tahina at wanadoo.mg>
Date: Friday, July 9, 2004 2:30 am
Subject: [cisco-nas] AS5350 E1 back to back

> Hi all,
> 
> I tried to connect 2 AS5350 back to back via E1 port (hdlc)
> 
> When I do a sh serial 3/0:0, it shows
> Serial3/0:0 is down, line protocol is down
> is it a clock issue?
> 
> clock configuration is available with AS5300 E1 controller, but 
> not for the 
> AS5350.
> 
> Any idea?
> 
> Kind regards.
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
>