[cisco-nas] Static IP address

[Clara Hatem]

Hello,

What is the command to allow an incoming call to be assigned a static IP
address on a Cisco 5300 NAS?

 

I have tested with both RadiusNT and Radiator radius servers. The user
account, although configured with a static IP address, is still being
assigned an IP from the pool. Below is a sample async interface
configuration.

 

 

interface Group-Async1

 ip unnumbered FastEthernet0

 encapsulation ppp

 no logging event link-status

 load-interval 30

 async dynamic address

 async mode interactive

 peer default ip address pool digital8

 ppp max-bad-auth 3

 ppp authentication pap chap dial-up

 ppp authorization dial-up

 ppp accounting dial-up

 group-range 1 30

 

Thank you

Clara

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20040920/f7c05f4b/attachment.html