[cisco-nas] Static IP address

[Oliver Boehmer (oboehmer)]

Did you configure "aaa authorization network group radius" or similar? 

	oli

________________________________

From: cisco-nas-bounces at puck.nether.net
[mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of Clara Hatem
Sent: Monday, September 20, 2004 5:33 PM
To: cisco-nas at puck.nether.net
Subject: [cisco-nas] Static IP address

Hello,

What is the command to allow an incoming call to be assigned a static IP
address on a Cisco 5300 NAS?

I have tested with both RadiusNT and Radiator radius servers. The user
account, although configured with a static IP address, is still being
assigned an IP from the pool. Below is a sample async interface
configuration.

interface Group-Async1
 ip unnumbered FastEthernet0
 encapsulation ppp
 no logging event link-status
 load-interval 30
 async dynamic address
 async mode interactive
 peer default ip address pool digital8
 ppp max-bad-auth 3
 ppp authentication pap chap dial-up
 ppp authorization dial-up
 ppp accounting dial-up
 group-range 1 30
 

Thank you

Clara