[cisco-nas] SNMP equivalent of "isdn test call ..."

[Michel Lanners]

This electronic message is not binding on its sender nor on Cetrel S.C.
Any use of information of this mail except the use by the addressee
within his or her business relation with Cetrel is strictly forbidden
CETREL S.C. L-2956 Luxembourg; Tel: 00352 35566-1; http://www.cetrel.lu
======================================================================= 

Hi all,

Is there a way via SNMP to make a router dial out?

This is for automated tests on dialer interfaces, i.e. regularly 
checking that physically everything is correct.

I used to do this via the ping MIB (with certain pings authorized to 
activate the dialer), but now I need to do this on unnumbered interfaces.

Or can I add a 'bogus' route pointing out the dialer interface, and 
then ping the destination of that route? I should point out that this 
is with dialer watch, so there is no 'dialer group' on the dialer 
interface.

Any ideas?

Thanks, and cheers

Michel

-- 

Michel Lanners              | "Being able to break security
CBS-SSC                     |  doesn't make you a hacker
michel.lanners at cetrel.lu    |  more than being able to hotwire cars
Cetrel S.C.                 |  makes you an automotive engineer."
10, Parc d'Activite Syrdall |
L-5365 Munsbach             |               Eric S. Raymond