[cisco-nas] dnis vpdn & tacacs config

[Oliver Boehmer (oboehmer)]

Tassos,

with dnis, we authorize the username "dnis:333333333" (to use your
example). The rest is ok, the profile is identical to the domain tunnel
profile except for the username..

	oli

Tassos Chatzithomaoglou <> wrote on Thursday, July 07, 2005 4:56 PM:

> When i have vpdn based on domain (=domain.gr), i'm using the
> following config on my tacacs server: 
> 
> user = domain.gr {
>       service = ppp protocol = vpdn {
>       tunnel-type = l2tp
>       tunnel-id = F_DOMAIN
>       vpdn-group = F_DOMAIN
>       l2tp-tunnel-authen=no
>       ip-addresses = "x.x.x.x/y.y.y.y"
>       }
> }
> 
> 
> If i want to have vpdn based on dnis (=333333333), will the following
> work? 
> 
> user = 333333333 {
>       service = ppp protocol = vpdn {
>       tunnel-type = l2tp
>       tunnel-id = F_DOMAIN
>       vpdn-group = F_DOMAIN
>       l2tp-tunnel-authen=no
>       ip-addresses = "x.x.x.x/y.y.y.y"
>       }
> }
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas