[cisco-nas] dnis vpdn & tacacs config

[Tassos Chatzithomaoglou]

Hi Oliver,

Does this mean i have to use the following in my case?

user = dnis:333333333 {
...
}


Oliver Boehmer (oboehmer) wrote on 7/7/2005 17:59:

> Tassos,
> 
> with dnis, we authorize the username "dnis:333333333" (to use your
> example). The rest is ok, the profile is identical to the domain tunnel
> profile except for the username..
> 
> 	oli
> 
> Tassos Chatzithomaoglou <> wrote on Thursday, July 07, 2005 4:56 PM:
> 
> 
>>When i have vpdn based on domain (=domain.gr), i'm using the
>>following config on my tacacs server: 
>>
>>user = domain.gr {
>>      service = ppp protocol = vpdn {
>>      tunnel-type = l2tp
>>      tunnel-id = F_DOMAIN
>>      vpdn-group = F_DOMAIN
>>      l2tp-tunnel-authen=no
>>      ip-addresses = "x.x.x.x/y.y.y.y"
>>      }
>>}
>>
>>
>>If i want to have vpdn based on dnis (=333333333), will the following
>>work? 
>>
>>user = 333333333 {
>>      service = ppp protocol = vpdn {
>>      tunnel-type = l2tp
>>      tunnel-id = F_DOMAIN
>>      vpdn-group = F_DOMAIN
>>      l2tp-tunnel-authen=no
>>      ip-addresses = "x.x.x.x/y.y.y.y"
>>      }
>>}
>>
>>
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nas
> 
> 

-- 
***************************************
         Tassos Chatzithomaoglou
Network Design & Development Department
              FORTHnet S.A.
          <achatz at forthnet.gr>
***************************************