[cisco-nas] dnis vpdn & tacacs config

[jc]

hi tassos,

On Thu, 7 Jul 2005, Tassos Chatzithomaoglou wrote:

> Does this mean i have to use the following in my case?
>
> user = dnis:333333333 {

yup that would be it...

i also do dnis based auth for vpdn but just with radius (cistron for now)


dnis:1234567    Password="something"
                 Service-Type = Outbound-User,
                 Cisco-AVPair = "vpdn:ip-addresses=x.x.x.x",
                 Cisco-AVPair = "vpdn:tunnel-id=xxxtun",
                 Cisco-AVPair = "vpdn:tunnel-type=l2tp",
                 Cisco-AVPair = "vpdn:l2tp-tunnel-password=xxxxXxxx"



http://www.cisco.com/en/US/tech/tk801/tk703/technologies_configuration_example09186a008009485d.shtml

hth

j.