[cisco-nas] Accounting gigawords

[Oliver Boehmer (oboehmer)]

Imad,

we send Giga-words attributes 52/53 only if the counter(s) wrapped at
least once. So you will only see it on long-lived sessions with lots of
traffic.

	oli

Imad Buhidma <> wrote on Monday, July 25, 2005 2:20 PM:

> Hello
> 
> We have Cisco 7206VXR (NPE-G1) processor with IOS image
> c7200-js-mz.123-8.T3 ,I have configured the router to send
> "Acct-Input-Giga-Words" attribute with "aaa accounting gigawords"
> command but when i issued "debug radius accounting" command i could
> not find anything related to "Acct-Input-Giga-Words" in debugging,
> here is some of debugging results :    
> 
> Jul 25 13:57:40.688: RADIUS:  Acct-Session-Id     [44]  10  "00000025"
> Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  41
> Jul 25 13:57:40.688: RADIUS:   Cisco AVpair       [1]   35 
> "client-mac-address=0060.4c3c.cde5" 
> Jul 25 13:57:40.688: RADIUS:  Framed-Protocol     [7]   6   PPP      
> [1] 
> Jul 25 13:57:40.688: RADIUS:  Framed-IP-Address   [8]   6   172.16.0.1
> Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  35
> Jul 25 13:57:40.688: RADIUS:   Cisco AVpair       [1]   29 
> "connect-progress=LAN Ses Up" 
> Jul 25 13:57:40.688: RADIUS:  Acct-Session-Time   [46]  6   1298
> Jul 25 13:57:40.688: RADIUS:  Acct-Input-Octets   [42]  6   443124
> Jul 25 13:57:40.688: RADIUS:  Acct-Output-Octets  [43]  6   5174679
> Jul 25 13:57:40.688: RADIUS:  Acct-Input-Packets  [47]  6   3779
> Jul 25 13:57:40.688: RADIUS:  Acct-Output-Packets [48]  6   4862
> Jul 25 13:57:40.688: RADIUS:  Acct-Authentic      [45]  6   RADIUS   
> [1] 
> Jul 25 13:57:40.688: RADIUS:  User-Name           [1]   11  "imad"
> Jul 25 13:57:40.688: RADIUS:  Acct-Status-Type    [40]  6   Watchdog 
> [3] 
> Jul 25 13:57:40.688: RADIUS:  NAS-Port-Type       [61]  6   Virtual  
> [5] 
> Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  19
> Jul 25 13:57:40.688: RADIUS:   cisco-nas-port     [2]   13 
> "1/0/0/10.41" 
> Jul 25 13:57:40.688: RADIUS:  NAS-Port            [5]   6   0
> Jul 25 13:57:40.688: RADIUS:  Class               [25]  74
> 
> all the debgging results are like this,there's nothing related to
> "Acct-Input-Giga-Words" attribute even when i clear all sessions. 
> 
> What soulid i do to make the router send "Acct-Input-Giga-Words"
> attribute and how i can check if the router send the attribute using
> debugging ?  
> 
> 
> Imad Buhidma
> Best Regards.
> 
> 
> 
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas