[cisco-nas] Accounting gigawords

[Imad Buhidma]

Hello 

We have Cisco 7206VXR (NPE-G1) processor with IOS image c7200-js-mz.123-8.T3 ,I have configured the router to send 
"Acct-Input-Giga-Words" attribute with "aaa accounting gigawords" command but when i issued "debug radius accounting" command i could not find anything related to "Acct-Input-Giga-Words" in debugging, here is some of debugging results :

Jul 25 13:57:40.688: RADIUS:  Acct-Session-Id     [44]  10  "00000025"
Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  41
Jul 25 13:57:40.688: RADIUS:   Cisco AVpair       [1]   35  "client-mac-address=0060.4c3c.cde5"
Jul 25 13:57:40.688: RADIUS:  Framed-Protocol     [7]   6   PPP                       [1]
Jul 25 13:57:40.688: RADIUS:  Framed-IP-Address   [8]   6   172.16.0.1
Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  35
Jul 25 13:57:40.688: RADIUS:   Cisco AVpair       [1]   29  "connect-progress=LAN Ses Up"
Jul 25 13:57:40.688: RADIUS:  Acct-Session-Time   [46]  6   1298
Jul 25 13:57:40.688: RADIUS:  Acct-Input-Octets   [42]  6   443124
Jul 25 13:57:40.688: RADIUS:  Acct-Output-Octets  [43]  6   5174679
Jul 25 13:57:40.688: RADIUS:  Acct-Input-Packets  [47]  6   3779
Jul 25 13:57:40.688: RADIUS:  Acct-Output-Packets [48]  6   4862
Jul 25 13:57:40.688: RADIUS:  Acct-Authentic      [45]  6   RADIUS                    [1]
Jul 25 13:57:40.688: RADIUS:  User-Name           [1]   11  "imad"
Jul 25 13:57:40.688: RADIUS:  Acct-Status-Type    [40]  6   Watchdog                  [3]
Jul 25 13:57:40.688: RADIUS:  NAS-Port-Type       [61]  6   Virtual                   [5]
Jul 25 13:57:40.688: RADIUS:  Vendor, Cisco       [26]  19
Jul 25 13:57:40.688: RADIUS:   cisco-nas-port     [2]   13  "1/0/0/10.41"
Jul 25 13:57:40.688: RADIUS:  NAS-Port            [5]   6   0
Jul 25 13:57:40.688: RADIUS:  Class               [25]  74

all the debgging results are like this,there's nothing related to "Acct-Input-Giga-Words" attribute even when i clear all sessions.

What soulid i do to make the router send "Acct-Input-Giga-Words" attribute and how i can check if the router send the attribute using debugging ?


Imad Buhidma
Best Regards.