[cisco-nas] can we use bandwidth command on Interface to control bandwidth ?

[Souphonh Phounsavath]

Dear All,

 

Can we use "bandwidth" command on router interface for control the bandwidth
of the link? For example, we will have one customer that will connect cross
over to our router interface, and they will need 128 kbps bandwidth. Can we
use the command bandwidth to set the bandwidth on our router interface as
follows:

 

interface FastEthernet1/0

 bandwidth 128  

 ip address xxx.xxx.xxx.xxx 255.255.255.252  

 no ip redirects  

 ip route-cache flow  

 duplex full  

 no cdp

!

 

Please advise. 

 

Thanks and regards,

 

Souphonh Phounsavath

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20050630/5737b761/attachment.html