[cisco-nas] Virtaul-profile feature Set

[Ahmad Cheikh Moussa]

Hi!

I have Cisco 3640 with 12.3(11)T3 IP Plus Feature
Set (c3640-is-mz.123-11.T3).

I want to configure virtual profiles. These profiles
shoul be used, when they are needed.
Normally the configuration should look like this :

virtual-profile if-needed
virtual-profile virtual-template 1
virtual-profile aaa

Since my update from 12.2 to 12.3(T) the line
"virtual-profile aaa" is away.

Any ideas, why this happen?
Is this command not supported with IP Plus ?
Is there a new way to configure this option ?

Regards,
  Ahmad




-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/