[cisco-nas] T.37

[Darryl Sladden (dsladden)]

Peder,

A T.38 incoming call to a T.37 outgoing call is NOT 
possible.

You could put a back to back T1 in the second 3640
and have calls go out T1 and back into T1 on same 
router.

Regards,
Darryl Sladden
Product Manager AS5000
Cisco Systems - ABU
dsladden at cisco.com
408-525-8970 

 

> -----Original Message-----
> From: cisco-nas-bounces at puck.nether.net 
> [mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of 
> info at beprojects.com
> Sent: Monday, November 07, 2005 12:06 PM
> To: cisco-nas at puck.nether.net
> Subject: [cisco-nas] T.37
> 
> Is anybody familiar with T.37 fax on a Cisco?  I'm trying to 
> configure it and can't quite figure out what to do.  I have 
> one 3640 which is the PRI gateway and I want it to forward 
> the call via T.38 to a seconf 3640, which I want to T.37 the 
> fax.  The reason for two boxes is that I don't want to mess 
> with my production gateway.  Of course all of the sample 
> configs show the box with the pri actually terminating the 
> fax, so I am not even sure if what I want is possible, but it 
> seems to me that it should be.  I just need a reference 
> config to follow.  Thanks.
> 
> Peder
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
>