[cisco-nas] RE: Lost fragments shdsl mlp

[T A]

RE: Lost fragments shdsl multilink

Hi

I'm multilinking two shdsl links , but when i do i get lost fragments

Virtual-Access4, bundle name is DSLStack
  Endpoint discriminator is DSLStack
  Bundle up for 00:23:49, 27/255 load, 2 receive classes, 1 transmit classes
  Receive buffer limit 24384 bytes per class, frag timeout 1000 ms
  Dialer interface is Dialer1
  Receive Class 0:
    0/0 fragments/bytes in reassembly list
    2726 lost fragments, 164501 reordered
    2681/2036853 discarded fragments/bytes, 2700 lost received 
<<<<<<<<<<<<<<
    0x7F8EC received sequence
  Receive Class 1:
    0/0 fragments/bytes in reassembly list
    0 lost fragments, 0 reordered
    0/0 discarded fragments/bytes, 0 lost received
    0x0 received sequence
  Member links: 2 (max 2, min not set)
    Vi2, since 00:23:49
    PPPoATM link, ATM PVC 0/38 on ATM0/1.1
    Packets in ATM PVC Holdq: 0, Particles in ATM PVC Tx Ring: 0
Vi3, since 00:23:49
    PPPoATM link, ATM PVC 0/38 on ATM0/0.1
    Packets in ATM PVC Holdq: 0, Particles in ATM PVC Tx Ring: 0
No inactive multilink interfaces


interface Dialer1
mtu 1448
bandwidth 4096
no ip proxy-arp
ip rip advertise 25
encapsulation ppp
no ip route-cache cef
no ip route-cache
dialer pool 1
dialer idle-timeout 0
no peer default ip address
no cdp enable
ppp max-bad-auth 3
ppp multilink
ppp hostname <l>
ppp pasword <l>
ppp multilink fragment disable
ppp multilink links maximum 2
ppp multilink mrru remote 1448
ppp multilink multiclass

_________________________________________________________________
Be the first to hear what's new at MSN - sign up to our free newsletters! 
http://www.msn.co.uk/newsletters