[cisco-nas] Cisco 3620 PPPoE server configuration

[Mounir Mohamed]

Dear Souphonh,

aaa new-model


aaa authentication ppp mounir group radius local
aaa authorization network mounir group radius
aaa accounting exec mounir start-stop group radius
aaa accounting network mounir start-stop group radius

interface Virtual-Template15
ip unnumbered Loopback0
no peer default ip address
ppp authentication pap mounir
ppp authorization mounir
ppp accounting mounir
end

radius-server host x.x.x.x auth-port 1812 acct-port 1813 key mounir123

Best Regrads,

Mounir Mohamed

On 10/31/05, Souphonh Phounsavath <souphonh at laopdr.com> wrote:
>
>  Dear All,
>
>  I would like to configure Cisco 3620 router as PPPoE server that uses
> RADIUS server as authenticating and accounting. However, I am very new to
> PPPoE configuration. Your help on documentation or ideas would be much
> appreciated.
>
>  Regards,
>
> Souphonh
>
>
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20051031/f1cd7b46/attachment.html