[cisco-nas] PRI Basi Check up

[Gert Doering]

Hi,

On Sun, Apr 16, 2006 at 02:48:41PM +0300, Ahmed Haroun wrote:
> What led should light when I insert the PRI line from the Service
> provider?

All the relevant ones.

(It would be a easier to give meaningful responses if you could provide 
some information about the type of equipment that you're using... on
german PRI lines, the red "S2M/V2M" LED on the NTPM has to go *off*, and 
usually some sort of "link" LED on the device goes on when all 4 wires
are wired correctly)

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de