[cisco-nas] Bonded (MLPPP) on 3640 routers -- disapointing performance

[Stephen Fulton]

Hi William,

Can you supply the appropriate config for the router?  Debugging the 
MLPPP session would be useful as well.  Those will make it much easier 
to determine which side the problem is occurring, yours or your provider.

William Schindler wrote:
> Hi All,
> 
> I am running two Cisco 3640 routers with two (2) T1 WIC DSU's each.  My 
> provider, broadwing, supplied me with bonded T1's.
> 
> Each router connects to two T1's running MLPPP.  When running bonded 
> (MLPPP) I see only a 10% increase in bandwidth. 
> I have tested each DSU individually and confirmed the 1.3-1.4 mbps 
> connection.  However, when bonded and running MLPPP the
> bandwidth increases only to about 1.7 mbps up and 1.4 mbps down.
> 
> I believe that the 3640 is well within it's ability to handle 3 mbps 
> traffic, but I am not getting that.
> 
> Does anyone have any ideas?
> 
> Bill
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas